System Architecture |
PICMG 1.3 Compliant |
CPU Support |
Single socket LGA775 with 533/800/1066 MHz FSB
Support Intel® Pentium 4/D processor supported |
System Memory |
4 x DDRII 240-pin DIMM
Dual channel DDR2 400/533/667 MHz |
BIOS |
AMI Flash BIOS
SMIBIOS (DMI) compliant
PXE (Pre-Boot Execution Environment) support
USB booting support |
Chipsets |
Intel®945G and ICH7R chipset |
LAN |
Dual Marvell 88E8053 PCI-Express GbE controller |
Display |
Graphic controller: Inter Graphics Media Accelerator 950 integrated with DB-15 VGA output |
I/O Interface |
- 2 x RS-232
- 1 x LPT
- 1 x IrDA
- 7 x USB2.0 (6 by pin header)
- 4 x SATAII-300, with Raid 0,1,5 and 10 supported
- 1 x ATA-100
- 1 x FDD
- 1 x PS2 Keyboard/Mouse
- 2 x 5 Pin header for 4 GPI and 4 GPO
|
I/O On Bracket |
VGA DB-15 connector x 1
USB2.0 port x 1
RJ45 Gigabit Ethernet LAN port x 2
Keyboard/Mouse x 1 |
Power Supply |
4 pin ATX 12V, 24 pin ATX Power on PICMG1.3 backplane |
Power Consumption |
12V, 9A; 5V, 2.6A; 3.3V, 6.3A; 5Vsb, 0.93A; -12V, 0.1A
(Pentium D 3.73GHz/1066MHz CPU with 4GB DDR2-667MHz) |
Watchdog Timer |
Software programmable supports 1 to 255 sec. system reset |
Dimensions |
380mm (L) x 133mm (W) |
Environment |
Board Level operating temperatures: -0°C to 60°C
Relative humidity: 5% to 95% (Non-condensing) |
