 |
Features Highlight |
 |
Main board:
SBC83675
CPU ZIF Socket 370 for Intel® Celeron® /
Pentium® III
VIA C3 processor : 533~1.4GHZ
System Memory One SDRAM DIMM, Max. 512MB
Chipset VIA VT8606 (Twist-T) + VT82C686B
BIOS Phoenix-award 4Mbit with RPL / PXE LAN boot
ROM,
Smart View and customer CMOS backup
SSD DiskOnChip® and CompactFlash™
Watchdog Timer 0.5~1600 sec with 64 levels; system
reset or NMI
On Board Graphics VIA Twister chip with mtegrated
S3 Pro Savage4 2D / 3D / Video accelerator
Serial Ports RS-232 x 3
RS-232 / 422 / 485 x 1
+5V/+12V power output capability by pin 1 and pin
8, selectable via jumper setting |
|
Parallel SPP / EPP / ECP
supported. Configurable to LPT1, LPT2,
LPT3 or disable
PS/2 Interfaces PS/2 mouse x 1
PS/2 keyboard x 1
DIO 4 channel bits of TTL/DTL compatible
Digital input/output
Hard Disk Drive Enhanced IDE interface 3.5" or
2.5" type
Ethernet RTL8100C, 10/100Base-T with WOL
USB 2 x USB ports, USB 1.0 compliant
Audio AC'97 Audio Codec with Amplify
Peripheral Build-in 3.5" slim type floppy disk
drive |
|
Display:
15" TFT
Brightness : 250nit
Resolution: XGA 1024 x 768 pixels
View Angle : U/D : 150° |
|
I/O Connectors:
D-Sub 9 pin
x 1 (male) for RS-232/RS-422/RS-485
D-Sub 9 pin x 3 (male) for RS-232
(One port reserve for touch screen)
D-Sub 25 pin x 1 (female) for parallel
D-Sub 15 pin x 1 (male) for DIO
P/S 2 x 2 for keyboard and mouse
RJ-45 x 1 for Ethernet
D-sub 15 pin x 1 (female) for S-VGA output
Line-out / Line-in / Mic-in
USB connector x 2 |
|
Expansion Slot: ISA x 2 +
PCI x 1 or PCI x 2 + ISA x 1
System Fan: 4 cm fan x 2
Touch Screen: Resistive type
Power Supply: AC 100-230V, 100W (DC18~56V, 100W for
option) |
|
Dimensions :
w/o expansion box :
17.05" (433mm) (W) x 3.59" (91.3mm) (D) x 14.09" (358mm)
(H)
w/ expansion box :
17.05" (433mm) (W) x 5.73" (145.5mm) (D) x 14.09" (358mm)
(H) |
|
Shipping Weight:
19.3 lbs. |
|
Operation
temperature range : 0°C-50°C (32°F
-122°F)
Relative humidity : 20% - 90%, non-condensing |
