For customization, consultation & customer support, call: 1.800.872.4547

Live Chat Support Software

AIV-APL1V1FL Fanless in-vehicle PC System


  • Rugged Fan-less Design
  • Intel Pentium N4200 Processors
  • 1 x DDR3L 1866 MHz SO-DIMM (Max. 8GB)
  • 2 x Swappable 2.5" HDD Bay
  • TPM 1.2 / 2.0 (Optional)
  • 3 x Mini PCI-e(Reserve for Wi-Fi and 4G LTE)
  • 4 x USB 3.0, 1 x RS-232/422/485, 3 x RS-232
  • Support 4x Channel Analog Capture Card
  • Support CAN 2.0A/2.0B & J1939 Protocol (Optional)
  • VGA & DVI Video Output
  • Safety: CE, FCC class B , E-Mark
  • Wide Operating Temperature -13°F ~ 140°F

The AIV-APL1V1FL is an Embedded Vehicle PC that supports Intel's Pentium N4200 and up to 16GB non-ECC DDR3L-1600MHz SO-DIMM. There are two swappable 2.5" disk bays with anti-vibration/anti-shock solution for SSD only. There is also two external SIM Slots, an on-board TPM 1.2 / 2.0 option and a CAN Bus 2.0B / OBD II (J1939) for BOM option. The dimensions are 270mm x 170mm x 63mm and the operating temperature is -25°C ~ 60°C. The power input is 16~75VDC input.

The AIV-APL1V1FL has a DB15 VGA port, one DVI, two SATA III port and four USB 3.0. There are also three RS-232 ports, one being 422/485 selectable and a 4-in / 4-out GPIO. Three Mini PCI-e are reserved for Wi-Fi and 4G LTE. This unit supports Windows 10 (64 bit) and Linux kernel to 4.4 or above (64 bit). The Smart In-Vehicle Power Management offers O/S Anti-Crash, which the power system controls boot up or shut-down as well as shut-down delay. A remote cable switch can power on the AIV-APL1V1FL or a power input serial connection to the cars battery and ignition switch could be used.

Barebone & Base Configurations

AIV-APL1V1FL Fanless In-Vehicle PC

  • Intel Pentium N4200 Processors
  • 2GB DDR3L SO-DIMM Memory
  • 1.0TB 2.5" SATA Hard Drive
  • 3 x RS232 (DB9), 1 x RS422/RS485 (DB9)
  • 4 x USB3.0
  • 8-bit GPIO (4 In, 4 Out)
  • VGA & DVI Video Output
  • Supports TPM 1.2, TPM 2.0 is Optional
  • Support 4x Channel Analog Capture Card
  • Support CAN 2.0A/2.0B & J1939 Protocol (Optional)
  • 3 x Mini PCIe (Reserve for Wi-Fi and 4G LTE)
  • 4G + GPS + Glonass Module (Optional)
  • 2 x Gigabit LAN Ports
  • 9-36VDC Power Connector

Barebone Only: